Various Topics on DJ Mixes

..kl.. ..ueg..

hi,

I replaced the bulb in one of my 1210's and after that i
wanted to see if i'd done it right so i put on the power while the turntable
was dis***embled (a quite stupid thing to do).
Afterwards, the deck is unable to hold any speed, it keeps speeding up and
slowing down all the time, while the LEDs are flashing.

looking further on the circuit itself and reading
on different news-groups i found out that there must be something in either
the control- or drive-circuit broken.
i checked 1200s.com, they have the drive and control-ICs for them, however
i dont know which part of them to get or if it was better to go straight
to the hifi-repair-dude downtown (dont want to get ripped off).
i was unable to find any further information about this topic,
maybe i can get some helpful replies from you.

thanks in advance,
nik

.... ..p..

that will teach u numbskull
"Niklas Kluegel" <niklas@t-online.de> wrote in message
news:20040120220915.2e745fbb.niklas@t-online.de...
> hi,
>
> I replaced the bulb in one of my 1210's and after that i
> wanted to see if i'd done it right so i put on the power while the
turntable
> was dis***embled (a quite stupid thing to do).
> Afterwards, the deck is unable to hold any speed, it keeps speeding up and
> slowing down all the time, while the LEDs are flashing.
>
> looking further on the circuit itself and reading
> on different news-groups i found out that there must be something in
either
> the control- or drive-circuit broken.
> i checked 1200s.com, they have the drive and control-ICs for them, however
> i dont know which part of them to get or if it was better to go straight
> to the hifi-repair-dude downtown (dont want to get ripped off).
> i was unable to find any further information about this topic,
> maybe i can get some helpful replies from you.
>
> thanks in advance,
> nik
>

.... ..o..rbrug..

Bravo!! That really helps!!

"pied piper" <hamlyn@rats.co.uk> wrote in message
news:hjjPb.416$9b5.367@newsfep3-gui.server.ntli.net...
> that will teach u numbskull
> "Niklas Kluegel" <niklas@t-online.de> wrote in message
> news:20040120220915.2e745fbb.niklas@t-online.de...
> > hi,
> >
> > I replaced the bulb in one of my 1210's and after that i
> > wanted to see if i'd done it right so i put on the power while the
> turntable
> > was dis***embled (a quite stupid thing to do).
> > Afterwards, the deck is unable to hold any speed, it keeps speeding up
and
> > slowing down all the time, while the LEDs are flashing.
> >
> > looking further on the circuit itself and reading
> > on different news-groups i found out that there must be something in
> either
> > the control- or drive-circuit broken.
> > i checked 1200s.com, they have the drive and control-ICs for them,
however
> > i dont know which part of them to get or if it was better to go straight
> > to the hifi-repair-dude downtown (dont want to get ripped off).
> > i was unable to find any further information about this topic,
> > maybe i can get some helpful replies from you.
> >
> > thanks in advance,
> > nik
> >
>
>

..i.. .. ..cki..

Niklas Kluegel wrote:

"better to go straight to the hifi-repair-dude downtown (dont want to get
ripped off)."

After your attempt to fix the lamp do you think it is wise for you to mess
with it further ;-0