Windows Vista

Hi,

I am trying to install Stata 10 on windows Vista. The manual says that
the first time I run Stata, I must run it as an administrator by right-
chostinghostinghostinghostinging on the Stata application icon.

However, when I right-chostinghostinghostinghosting, I do not see the option to 'run as
adminstrator'. I went to the Properties> advanced, and the option to
'run as administrator' was greyed out.


Do you have any ideas of what I am doing wrong? And how can I get
Vista to allow me to 'run as administrator'?????


Thanks so very much,
Kate

"katewrote in message

> Hi,
>
> I am trying to install Stata 10 on windows Vista. The manual says that
> the first time I run Stata, I must run it as an administrator by right-
> c****ing on the Stata application icon.
>
> However, when I right-c****, I do not see the option to 'run as
> adminstrator'. I went to the Properties> advanced, and the option to
> 'run as administrator' was greyed out.
>
>
> Do you have any ideas of what I am doing wrong? And how can I get
> Vista to allow me to 'run as administrator'?????
>
>

You know, you can disable UAC, which controls Run As Administrator. With UAC
disabled, you don't need RAM to do anything, and you should be able to
proceed with the install. Once the install is done, then you can enable UAC
again.

To enable/disable UAC, you use the Windows-Key and R-key, which should
pop-up the Run Box where you enter MSCONFIG. You can go to the Tools tab
where you can disable/enable UAC.

On Arnold wrote:


> > Hi,
>
> > I am trying to install Stata 10 on windows Vista. The manual says that
> > the first time I run Stata, I must run it as an administrator by right-
> > c****ing on the Stata application icon.
>
> > However, when I right-c****, I do not see the option to 'run as
> > adminstrator'. I went to the Properties> advanced, and the option to
> > 'run as administrator' was greyed out.
>
> > Do you have any ideas of what I am doing wrong? And how can I get
> > Vista to allow me to 'run as administrator'?????
>
> You know, you can disable UAC, which controls Run As Administrator. With UAC
> disabled, you don't need RAM to do anything, and you should be able to
> proceed with the install. Once the install is done, then you can enable UAC
> again.
>
> To enable/disable UAC, you use the Windows-Key and R-key, which should
> pop-up the Run Box where you enter MSCONFIG. You can go to the Tools tab
> where you can disable/enable UAC.

Hi,

Thanks for your response.

I tried turning off UAC under control panel > user accounts. I was
still not able to start Stata-- I still get the same error message:

"I cannot open C:\Program Files\Stata10\STATA.LIC for writing.
No Action Taken."

? ?

I was told by the FAQs on the Stata website, that this is because the
default Vista permission settings do not allow applications write
permissions to their respective install directories even if you are
logged in to a machine as administrator. Stata needs these permissions
to install.

They say to get around the problem you must right-c**** on the Stata
executable in the Stata install directory and select "Run as
Administrator" from the right-c**** menu to open Stata. But as I
mentioned, I cannot run as administrator.

>
> They say to get around the problem you must right-chostinghostinghostinghosting on the Stata
> executable in the Stata install directory and select "Run as
> Administrator" from the right-chostinghostinghostinghosting menu to open Stata. But as I
> mentioned, I cannot run as administrator.
>
>

You may be able to create a short-cut for the install exe and go to
Properties on the the short-cut and do Run As Administrator.

Have you tried that?

Arnold wrote:
> > They say to get around the problem you must right-c**** on the Stata
> > executable in the Stata install directory and select "Run as
> > Administrator" from the right-c**** menu to open Stata. But as I
> > mentioned, I cannot run as administrator.
>
> You may be able to create a short-cut for the install exe and go to
> Properties on the the short-cut and do Run As Administrator.
>
> Have you tried that?

How do I do that?

kate wrote in message


>> > They say to get around the problem you must right-c**** on the Stata
>> > executable in the Stata install directory and select "Run as
>> > Administrator" from the right-c**** menu to open Stata. But as I
>> > mentioned, I cannot run as administrator.
>>
>> You may be able to create a short-cut for the install exe and go to
>> Properties on the the short-cut and do Run As Administrator.
>>
>> Have you tried that?
>
> How do I do that?
>

If the install exe is on the hard drive, then you right-c**** the exe and do
a Create Short Cut, which should put the short-cut in the same folder as the
exe or do a Send To and Send the Short-cut to the Desktop. In either case,
you should see the Run As Admin with you right-c**** the short-cut. You
should also be able to see the Advanced button too off of Properties. Well,
that's the way it works on my Vista. ;-)

Arnold



> >> > They say to get around the problem you must right-c**** on the Stata
> >> > executable in the Stata install directory and select "Run as
> >> > Administrator" from the right-c**** menu to open Stata. But as I
> >> > mentioned, I cannot run as administrator.
>
> >> You may be able to create a short-cut for the install exe and go to
> >> Properties on the the short-cut and do Run As Administrator.
>
> >> Have you tried that?
>
> > How do I do that?
>
> If the install exe is on the hard drive, then you right-c**** the exe and do
> a Create Short Cut, which should put the short-cut in the same folder as the
> exe or do a Send To and Send the Short-cut to the Desktop. In either case,
> you should see the Run As Admin with you right-c**** the short-cut. You
> should also be able to see the Advanced button too off of Properties. Well,
> that's the way it works on my Vista. ;-)

Hi,

Thanks so very much for all your help. I don't think that I have the
install exe on my hard drive- I am installing the program from a CD.
Do you know how to get the install exe on the hard drive?

Arnold wrote:


> > On Sep 15, 3:48 pm, "Mr. Arnold" <MR. > wrote:
> >> > They say to get around the problem you must right-c**** on the Stata
> >> > executable in the Stata install directory and select "Run as
> >> > Administrator" from the right-c**** menu to open Stata. But as I
> >> > mentioned, I cannot run as administrator.
>
> >> You may be able to create a short-cut for the install exe and go to
> >> Properties on the the short-cut and do Run As Administrator.
>
> >> Have you tried that?
>
> > How do I do that?
>
> If the install exe is on the hard drive, then you right-c**** the exe and do
> a Create Short Cut, which should put the short-cut in the same folder as the
> exe or do a Send To and Send the Short-cut to the Desktop. In either case,
> you should see the Run As Admin with you right-c**** the short-cut. You
> should also be able to see the Advanced button too off of Properties. Well,
> that's the way it works on my Vista. ;-)

Hi,

Thanks so very much for all your help. I don't think that I have the
install exe on my hard drive- I am installing the program from a CD.
Do you know how to get the install exe on the hard drive?

Arnold wrote:

> > On Sep 15, 3:48 pm, "Mr. Arnold" <MR. > wrote:
> >> > They say to get around the problem you must right-c**** on the Stata
> >> > executable in the Stata install directory and select "Run as
> >> > Administrator" from the right-c**** menu to open Stata. But as I
> >> > mentioned, I cannot run as administrator.
>
> >> You may be able to create a short-cut for the install exe and go to
> >> Properties on the the short-cut and do Run As Administrator.
>
> >> Have you tried that?
>
> > How do I do that?
>
> If the install exe is on the hard drive, then you right-c**** the exe and do
> a Create Short Cut, which should put the short-cut in the same folder as the
> exe or do a Send To and Send the Short-cut to the Desktop. In either case,
> you should see the Run As Admin with you right-c**** the short-cut. You
> should also be able to see the Advanced button too off of Properties. Well,
> that's the way it works on my Vista. ;-)

Hi,

Thanks so very much for all your help. I don't think that I have the
install exe on my hard drive- I am installing the program from a CD.
Do you know how to get the install exe on the hard drive?

kate

>> > On Sep 15, 3:48 pm, "Mr. Arnold" <MR. > wrote:
>> >> > They say to get around the problem you must right-c**** on the Stata
>> >> > executable in the Stata install directory and select "Run as
>> >> > Administrator" from the right-c**** menu to open Stata. But as I
>> >> > mentioned, I cannot run as administrator.
>>
>> >> You may be able to create a short-cut for the install exe and go to
>> >> Properties on the the short-cut and do Run As Administrator.
>>
>> >> Have you tried that?
>>
>> > How do I do that?
>>
>> If the install exe is on the hard drive, then you right-c**** the exe and
>> do
>> a Create Short Cut, which should put the short-cut in the same folder as
>> the
>> exe or do a Send To and Send the Short-cut to the Desktop. In either
>> case,
>> you should see the Run As Admin with you right-c**** the short-cut. You
>> should also be able to see the Advanced button too off of Properties.
>> Well,
>> that's the way it works on my Vista. ;-)
>
> Hi,
>
> Thanks so very much for all your help. I don't think that I have the
> install exe on my hard drive- I am installing the program from a CD.
> Do you know how to get the install exe on the hard drive?
>
>

You make a folder on the HD called Kate, as an example, if you have a enough
disk space to copy the entire CD to the HD, which you should have enough
space. You select all the files/folders on the CD and copy/paste the CD to
Kate. And you run the install.exe form Kate, which should be able to make
the short-cut at that point. You should be able to copy from the root
folder on the CD so that it copies everything at once to Kate.

If that don't work for you, then you need to get on the phone with the
software's tech support and tell them *you are telling me I need to Run As
Admin* to install your software on Vista. Tech Support, you tell me how to
do this.